Alpine X801D-U Owner's Manual page 40

Setting item:
Security Code
Setting contents:
Off (Initial setting) / On
1
2
3
• Enter the 6-digit number.
• Input numbers are displayed as "*. "
• Touch [ ] to delete an entered number.
To delete all the numbers you have entered, touch [
least 2 seconds.
4
• If you forget a registered password, you can not use this unit. In this
case, service will be required.
1
2
• Input numbers are displayed as "*. "
Setting contents:
Serial Number / Firmware Version / Model Name
40
-EN
[OK]
[OK]
] for at
[OK]
[OK]
Setting item:
Clear All Settings
1
[Reset]
2
3
[OK]
• Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.
Setting item:
Demo mode
Setting contents:
Off / On (Initial setting)
• If you perform an operation during the Demo mode, the demonstration
is temporarily stopped.
[OK]