Presetting Stations Manually; Presetting Stations Automatically; Listening To The Radio - Alpine X801D-U Owner's Manual

Listening to the Radio

1
(AUDIO)
• You can select and change the source from the Menu screen
(page 19) or the Favourite screen (page 23).
2
[ ]
• [ ] button displays the current selected band. (e.g. [FM1])
3
4
[ ]
• [ ] button displays the current selected mode. (e.g. [DX Seek])
5
• There are two modes you can select for auto tuning, DX and Local:
- DX Seek (Distance) mode;
Both strong and weak stations will be tuned in.
- Local Seek mode;
Only strong stations will be tuned in.
The initial setting is DX.
- Manual mode;
The frequency is manually tuned in steps
- PTY Seek mode (RDS FM Radio Mode only);
The currently selected programme type station will be tuned.
- Preset (Preset UP/DN) mode;
You can directly switch preset stations.
6
[ ] [ ]
• The , buttons provide the same functions above.
50
-EN
[ ] [ ]

Presetting Stations Manually

1
2
3
• For details on switching to the Preset mode screen, see
band main screen example" (page 49).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorised.

Presetting Stations Automatically

Memory)
• If no stations are stored, the tuner will return to the original station you
were listening to before the automatic storing procedure began.
• You can cancel this process by touching [
the tuner is automatically seeking stations. Canceling will return the
tuner preset to the previous setting.
Tuning to Preset Stations
1
[ ]
• [ ] button displays the current selected band. (e.g. [FM1])
2
3
• For details on switching to the Preset mode screen, see
band main screen example" (page 49).
• You can also switch the preset station by touching [ ] or [ ] when the
tuning mode of "Preset" is chosen.
in "MW/LW
[ ] (Auto
] (Auto Memory) while
in "MW/LW