Camera Operation (Optional); Rear Camera Operation; Checking Rear Camera View; Displaying The Rear View Video While The Car Is In Reverse - Alpine INE-W960A Owner's Manual

Camera Operation
(Optional)
When an optional camera is connected, the view video of camera can be
output to the monitor.
Depending on your camera, please choose the camera type first. For
details, refer to "Camera Setup" (page 43).
Rear camera:
If an HCE-C305R*/HCE-C300R*/HCE-C200R/HCE-C115/HCE-
C105 camera is connected, when the vehicle is reversed, the
rear camera view (guide marks for vehicle width and available
distance) is displayed automatically on the screen of this unit.
* When connecting to HCE-C305R/HCE-C300R, calibration must be
performed. For details, refer to "Calibration" in the owner's manual
of HCE-C305R/HCE-C300R.
You can adjust the quality of the camera image.
Setting items: Brightness / Color / Contrast
Refer to "Visual Setting" (page 27).

Rear Camera Operation

Set "Rear" for "AUX Camera Setting" (page 44).

Checking Rear Camera view

Touch [ ] of Top banner.
The Rear Camera view is displayed.
• Touch the screen to turn on the guide display.
• Touch the Caution telop to change the location of Caution.
• Press the / button to close the camera display screen.
Displaying the Rear View Video while the
Car is in Reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Never depend solely on the camera when backing up. Always turn
and look and only use the camera for additional assistance.
• This function is effective when the reverse wire is properly connected.
60
-EN
Caution telop