Alpine X801D-U Owner's Manual page 34

Setting item:
X-OVER
• When the Sound Setup of the Shortcut Setup is selected to "BASS
ENGINE SQ, " you cannot perform the set up.
1
[Channel]
• The channel being adjusted is displayed in red.
2
Setting contents:
20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100 / 125 / 160 / 200 Hz
Setting contents:
0 (Initial setting) / 6 / 12 / 18 / 24 dB/oct.
Setting contents:
-12 to 0 dB (Initial setting: 0)
3
4
[Preset 1] [Preset 2]
• Touch [Flat] to initialise all values.
• If the Rear Speaker setting is "Off, " the Rear Speaker setting cannot be
edited (page 32).
• If the Subwoofer setting is "Off, " the Subwoofer setting cannot be edited
(page 32).
• While adjusting the X-OVER you should consider the frequency
response of the connected speakers.
[Preset 1] [Preset 2]
34
-EN
[Preset 3]
[Preset 3]
Setting item:
Time Correction
1
2
[ms] [cm] [inch]
3
[ ] [ ]
4
[Preset 1] [Preset 2]
• Touch [Flat] to set all values to 0.0.
• If the Rear Speaker setting is "Off, " the Rear Speaker setting cannot be
edited (page 32).
• If the Subwoofer setting is "Off, " the Subwoofer setting cannot be edited
(page 32).
[Preset 1] [Preset 2]
Setting item:
Defeat
Setting contents:
Off (Initial setting) / On
[Preset 3]
[Preset 3]