Uniden WDECT 2300 Quick Start Manual page 20

UP349BH (WDECT2300) ENG OM
This is an example, if
you have handset #1
and #2.
[ 14 ]
1/5/05 1:18 PM Page 14
Room Monitor
Using Room Monitor
1) Enter the Room Monitor menu (see "Entering the
Menu" on page 13).
To Room Monitor appears.
2) Select the handset you want to monitor by using
/vol/ or /vol/ .
3) Press .
RoomMonitor appears, and you hear sounds in the
room where the handset is installed.
4) To finish the Room Monitor, press
handset to the cradle.
Handset Setup
Programming your Voice Mail Access Number
1) Enter the Handset Setup menu, and then the Edit
Voice Mail submenu (see "Entering the Menu" on page
13). Edit V_mail No. appears.
2) Enter your personal access number using the number keypad (0-9),
, , /del, or
3) Press . You will hear a confirmation tone.
To delete the current Voice Mail Access Number, delete all numbers in step 2
using /del and
To Room Monitor
Handset
RoomMonitor
Handset #2
or return the
Edit V_mail No.
1234567890
redial/pause (up to 20 digits).
.
#2