Page 1
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page a WDECT 2300 Wide Band Digital Technology provides the clearest sound Quick Start and the best privacy. Guide...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page i INSTALLATION & SAFETY Choosing the best location for your phone. When choosing a location for your phone there are a number of appliances the phone should not be near, and areas you should avoid.
Here! installed and operating as quickly as possible - however it does not attempt to explain any of the advanced features of the WDECT2300 series. Installing the Base Unit Route the cord. 1) Connect the AC adapter to the DC IN 9V jack and to a standard AC wall outlet.
Page 4
RED and BLACK dots on the phone case for first time. the plug to fit properly. Press firmly until it clicks Black • Use only the Uniden Wire Wire into place. rechargeable battery pack (BT-446)
Page 5
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page iv Charging the handset 1) Place the handset in the main base unit or charging cradle with the keypad facing forward. Recharge your phone on a regular basis by returning the handset to the base after each phone call.
GETTING STARTED Steps for Entering Names and Special Characters Viewing the Phonebook Controls and Functions Making Calls Using the Phonebook Uniden Company Philosophy Speed Dialing Welcome Editing or Erasing a Stored Name, Features Phone Number, Distinctive Ring, and Speed Dial...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 1 CONTROLS AND FUNCTIONS 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands-Free Speaker 5. Handset Battery Compartment 6. New Message LED 7.
Page 8
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 2 Base 23. Base Antenna 27. TEL LINE Jack 24. Base Charging Contacts 28. DC IN 9V Jack 25. charge LED [ 2 ]...
To bring outstanding wireless communication products to people’s lives throughout the world. WELCOME Congratulations on your purchase of the Uniden Multi-Handset Cordless System telephone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 2 handsets.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 5/23/05 9:49 AM Page 4 FEATURES Great features of this cordless phone include: • Designed and Engineered in Japan • Wide Band Digital Technology • Multi (2) Handset Capable •...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 5 CHECKING THE PACKAGE CONTENTS Make sure you have received the following items in the package. If any of these items are missing or damaged, contact your retailer.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 6 MOUNTING THE BASE UNIT ON A WALL You can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 7 BATTERY MAINTENANCE Battery use time (per charge) Fully charged • Up to 7 hours continuous use. • Up to 10 days when the handset is in the standby mode (up to 15 hours when in DirectLink mode) Recharge your phone on a regular basis by returning the handset to the charger after each phone call.
Page 14
Do not remove or damage the battery casing. • To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. [ 8 ]...
Page 9 HEADSET INSTALLATION Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. Headset is available through Uniden authorized retailers.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 10 ABOUT THE MENU OPTIONS There are 5 main menu options, (DirectLink Mode, Room Monitor, Handset Setup, Global Setup and System Reset) and submenu options. Summary of the Main Menu and Submenu During Global Setup and System Reset,...
Page 17
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 11 Handset Setup The following submenu options must be set separately for each handset. Submenu name Description Edit Voice Mail Program or delete the voice mail access number (see page 14). Ringer Tones Adjusting the ringer tone (tone your phone makes when ringing) (Default is Flicker)
Page 18
(see page 19). Replacing Base Clear the base ID. Use this option, for example, if you wish to deregister the base to use the handset with another base of the WDECT2300 series (see page 19). [ 12 ]...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 13 SETTING UP THE MENU Entering the Menu 1) Press the /del key in standby mode. DirectLink Mode 2) Use /vol/ /vol/ to move the pointer to To back to the a desired main menu (DirectLink Mode, Room Monitor, Room Monitor...
Page 20
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 14 Room Monitor Using Room Monitor 1) Enter the Room Monitor menu (see “Entering the To Room Monitor Menu” on page 13). Handset To Room Monitor appears. This is an example, if 2) Select the handset you want to monitor by using you have handset #1...
Page 21
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 15 Selecting a Ringer Tone 1) Enter the Handset Setup menu, and then the Ringer Ringer Tones Tones submenu (see “Entering the Menu” on page 13). Flicker There are 10 ringer tones or 10 Polyphonic Tones to Clatter...
Page 22
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 16 Setting the Anykey Answer 1) Enter the Handset Setup menu, and then the Anykey Anykey Answer Answer submenu (see “Entering the Menu” on page 13). 2) Press /vol/ /vol/...
Page 23
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 17 Global Setup Setting Name Tag (POP ID) 1) Enter the Global Setup menu, and then the Name Tag submenu (see “Entering the Menu” on page 13). 2) Press /vol/ /vol/...
Page 24
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 18 Setting the Dial Mode (Australia only) 1) Enter the Global Setup menu, and then the Dial Mode Dial Mode submenu (see “Entering the Menu” on page 13). Tone 2) Press /vol/...
Page 25
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 19 System Reset De-register the Handset 1) Enter the System Reset menu, and then the Deregister Which Handset? HS submenu (see “Entering the Menu” on page 13). Handset 2) Press /vol/...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 20 MAKING AND RECEIVING CALLS This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other •...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 21 KEYPAD LOCK The Keypad Lock prevent user from pressing the keypad accidentally. You can still answer calls, and receive page and phonebook locations, and the keypad lock is reactivated after the operation. To lock the keypad Press and hold until you hear a confirmation tone.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 22 REDIALING A CALL The last three phone numbers dialed can be quickly redialed. Redialing from Standby Mode • If the number <Redial1> 1) Press redial/pause in standby mode.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 23 ADJUSTING THE HANDSET RINGER, EARPIECE AND SPEAKER VOLUME Handset ringer volume Press the volume up key or volume down key (labeled as Standby Mode - The /vol/ /vol/ in standby mode to select one...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 24 MUTE MICROPHONE You can temporarily turn off the microphone so that the person you are talking with cannot hear you. 1) Press /del during talk mode (while phone is in use). 2) Press /vol/ /vol/...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 25 CLARITY BOOSTER If you encounter interference while using your phone, you Talk can manually improve the sound by setting the Clarity Boost On Booster to on. This works only when the phone is in use. •...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 26 FIND HANDSET To locate the handset, press on the base when the base is in standby mode. All registered handsets If the battery pack is beeps for 60 seconds, and “Paging”...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 27 USING ONE TOUCH VOICE MAIL ACCESS If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 28 PHONEBOOK The Phonebook allows you to dial a number using just a few key presses. Your phone stores names/numbers in the phonebook memory location, and you can search names in •...
Page 35
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 29 6) Distinctive Ring appears. Press /vol/ Distinctive Ring /vol/ to move the pointer to one of the Distinctive No Selectn Ring options, and then press Flicker Distinctive ringing If you choose not to store a Distinctive Ring, simply select...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 30 STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS Refer to the letters on the number keys to select the desired characters. With each press of a number key ( ), the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key.
Page 37
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 31 If you make a mistake while entering a name to move the cursor to the incorrect character. Press /del to erase the wrong character and then enter the correct character.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:18 PM Page 32 VIEWING THE PHONEBOOK Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 33 MAKING CALLS USING THE PHONEBOOK From Standby Mode 1) When the phone is in standby mode, view the Movies phonebook location to dial (see “Viewing the 0295979035 Phonebook”...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 34 EDITING OR ERASING A STORED NAME, PHONE NUMBER, DISTINCTIVE RING, AND SPEED DIAL 1) When the phone is in standby mode, Phonebook :100 press phonebook.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 35 CHAIN DIALING The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 36 CALLER ID You must subscribe to Caller ID services through your local telephone provider to use these features. • If you answer a call When the telephone rings, the Caller ID feature allows you to view the caller’s name, and before the Caller ID phone number along with the date and time of call.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 37 2) When you pick up the phone, the display changes to Talk. (AutoTalk feature is set to on). Data errors appear as “ ”. VIEWING THE CALLER ID LIST The Caller ID list stores information for incoming calls - even unanswered calls.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 38 DELETING A CALLER ID MESSAGE Deleting Information from the Caller ID List 1) When the phone is in standby mode, view the Caller • Once the Caller ID Delete Caller ID ID information to be deleted (see “Viewing the Caller data has been...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 39 USING THE CALLER ID MESSAGE LIST Calling a party from the Caller ID list From Standby mode • You cannot make a call from the Caller ID list 1) When the phone is in standby mode, view the Caller ID 21/12 11:20AM if your phone is...
IMPORTANT: • If you purchase a WDECT2305 extra handset, please register the handset to the WDECT2300 series base before use. The WDECT2305 will not operate until it is registered. • If you change a setting of the Global Setup menu in one of the handsets, you change settings for all the handsets.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 41 REGISTER THE HANDSET If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. •...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 42 USING TWO WAY COMMUNICATION BETWEEN THE HANDSETS ANYWHERE WITHOUT THE BASE (DIRECTLINK) To use this feature, you must enter the two Two handsets can be handsets into the DirectLink mode first.
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 43 3-WAY CONFERENCING The phone permits 3-way conversations between 2 handsets, and an outside line. 1) During a call, press on another handset to initiate the 3-way conversation. 2) To remove either caller from your conversation, press key on either handset.
(s) and base identification numbers. To do this, select For model number verification, visit “System Reset” from handsets display menu option list (see page 19 for guidance). our website www.uniden.com.au or www.uniden.co.nz [ 44 ]...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 45 CHANGING THE DIGITAL SECURITY CODE The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
Warning To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product. Caution • Use only the specified Uniden battery pack (BT-446).
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 47 TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The charge LED won’t illuminate • Make sure the AC adapter is plugged into the base and wall outlet. when the handset is placed in •...
Page 54
You cannot make an intercom • Make sure that the receiving handset is not in use. call with other handset. If you still have a problem. • Check our web site for the latest information and frequently asked questions. www.uniden.com.au www.uniden.co.nz [ 48 ]...
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 49 INDEX 0 - 9 Erasing........34 3-way conferencing ....43 Day & Time ........17 Making calls ......33 20 ring options ......15 Deregister the handset ....19 Storing........28 Dial Mode ........18 Viewing ........32 Digital security code ....45...
(C) Improperly installed, (D) Repaired by someone other than an authorized Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as part of a system not manufactured by Uniden.
Page 57
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 51 NOTE [ 51 ]...
Page 58
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 52 NOTE [ 52 ]...
Page 59
All manuals and user guides at all-guides.com UP349BH (WDECT2300) ENG OM 1/5/05 1:19 PM Page 53 NOTE [ 53 ]...
Page 60
Place this handset and charger in any convenient location, Handset Cordless no need for an extra phone jack! Another innovation Systems: WDECT2300/ from Uniden, the company that bring outstanding WDECT2315/ wireless communication products to people's lives WDECT2355 Series throughout the world.