Uniden WDECT 2300 Quick Start Manual page 23

UP349BH (WDECT2300) ENG OM
Global Setup
Setting Name Tag (POP ID)
1) Enter the Global Setup menu, and then the Name Tag submenu (see "Entering the
Menu" on page 13).
2) Press /vol/ or
3) Press . You will hear a confirmation tone.
Setting Insert Zero (New Zealand only)
1) Enter the Global Setup menu, and then the Insert 0 submenu (see "Entering the
Menu" on page 13).
2) Press /vol/ or
3) Press . You will hear a confirmation tone.
Setting Day and Time
1) Enter the Global Setup menu, and then the Day & Time
submenu (see "Entering the Menu" on page 13).
2) Press /vol/ or
the week, and then press
3) Press /vol/ or
press .
4) Press /vol/ or
5) Press /vol/ or
You will hear a confirmation tone.
1/5/05 1:18 PM Page 17
/vol/ to change the selection, On or Off.
/vol/ to change the selection, On or Off.
/vol/ to select the day of
.
/vol/ to set hour and then
/vol/ to set minute and then press
/vol/ to choose AM or PM, and then press
• When a Global
setting is changed
from one handset,
this affects all
registered handsets.
• For setting the Day
Day & Time
and Time, the idle
time-out is extended
SUN 12:00 AM
to 2 minutes.
[ / / / /SELECT]
.
.
[ 17 ]