Register The Handset - Uniden WDECT 2300 Quick Start Manual

UP349BH (WDECT2300) ENG OM

REGISTER THE HANDSET

If you purchase an extra handset, you need to register the handset to the
base before use. Only one handset can be registered at a time.
The handset ID for the supplied handset was assigned at
the factory, which has #1 in the display. When you register
additional handset to the base, the handset ID will
be assigned.
1) Before registering the extra handset, the
battery pack must be charged for
15-20 hours.
2) Place the extra handset in the main base
unit to begin registration.
3) While the handset is registering, Handset
Registering will appear in the LCD.
When Registration Complete is
displayed, the handset has been
registered to the base.
If Registration Failed appears,
please try these steps again.
1/5/05 1:19 PM Page 41
1
Extra Handset
Charger
2
Place the extra
handset in the main
base to register.
R e g i s t r a t i o n
C o m p l e t e
Extra Handset
+
3
Main Base
• An extra handset can
Place handset
on main base
to register
• Standby Mode -
Charge the handset
for 15-20 hours.
Extra Handset
Main Base
4
Charger
be registered when
the main base is in
standby mode.
The handset is not in
use and
has
not been pressed.
[ 41 ]