Front Panel View - Onkyo TX-NR801/E Service Manual

FRONT PANEL VIEW

To select an input source, press the desired button
(REC OUT or ZONE 2) and then press one of the
input source b utton within 8 seconds. That source will
be output for recording or vie wing in the remote zone.
To set the output to the source channel, press the
desired b u tton (REC OUT or ZONE 2) twice in suc-
cession. To turn of f the output, press the desired but-
ton (REC OUT or ZONE 2) and then press the OFF
button within 8 seconds.
Note:
The Rec Out and Zone 2 buttons use the same cir
cuit and therefore cannot be used at the same time.
When REC OUT is selected, nothing is output to
Zone 2. When ZONE 2 is selected, REC OUT is
automatically fix ed to SOURCE.
SETUP button
Press to enter the Setup Menu. The OSD Menu will
appear on the TV monitor as well as the front dis-
play on the TX-NR801/TX-NR801E.
ENTER button
Press to display the screen for the item that is
selected in the Setup Menu.
RETURN button
In the Setup Menu, press to go back one level. If
pressed while at the Main Menu, you will exit the
Setup Menu.
Front Panel Display
A
Input signal path indicators
Sho ws from which terminal the input signal is com-
ing.
B
Listening mode or digital input format
indicators
One of these indicators lights to sho w the format of
the current input source. In addition, one of the lis-
tening mode indicators lights to indicate the current
listening mode.
C
Tuning indicators
AUTO indicator
Lights when recei ving FM broadcasts in the stereo
mode. Turns of f when placed into the monaural
mode.
RDS indicator (Eur opean models only)
Lights when an RDS station is being received.
TUNED indicator
Lights when a radio station is being received.
MASTER VOLUME dial
Use to control the volume in the main zone. The vol-
ume for the remote zone (Zone 2) is independent.
VIDEO 5 INPUT terminals
For connecting a video camera or g ame de vice.
Input source buttons and indicators (DVD,
VIDEO 1~5, TAPE, TUNER, PHONO, CD, and
NET AUDIO)
Press these b uttons to select the input source for the
main zone.
-
To select the input source for the remote zone (Zone
2) or recording out (REC OUT), first press the
ZONE 2 or REC OUT button, and then press the
desired input source button. The input channel with
its indicator lit red is output to REC OUT and the
one with its indicator lit green is output to ZONE 2.
UPSAMPLING indicator
Lights during upsampling. This function is available
when the input source is Analog/PCM and the lis-
tening mode is set to the stereo or surround mode.
PHONES jack
This is a standard stereo jack for connecting stereo
headphones.
PURE AUDIO indicator
Lights during pure audio playback.
FM STEREO indicator
Lights when an FM broadcast station is being
recei ved in stereo. Turns of f when placed into the
monaural mode.
D
Multi function display
During normal operation, sho ws the current input
source and volume. When the FM or AM input is
selected, shows the frequenc y and preset number
When the DISPLAY button is pressed, sho ws the
listening mode and input source format. However,
does not sho w the source format when the FM or
AM source is selected.
E
Volume display
Shows the v olume le vel.
F
SLEEP indicator
Lights when the sleep timer is turned on.
4
TX-NR801/E
.