Using The Data Transferred To The P-Touch; A User-Defined Character Image; Printing The Transferred Template - Brother P-touch E550W User Manual

Using the Data Transferred to the P-touch

A template, database or user-defined character image transferred from the computer can be
used to create or print the label.
To delete the transferred data, refer to "Deleting the Transferred Data" on page 41.

A User-defined Character Image

To enter the image, refer to "Entering Symbols" on page 4.

Printing the Transferred Template

A label layout created with P-touch Editor (*.lbx file) can be transferred to the P-touch, where
it can be used as a template for printing labels. Templates can be edited or printed using text
from either a database, or by directly typing text in.
• Before editing a template, transfer the template to the P-touch.
• When the transfer of the data to the P-touch is complete, turn the P-touch off and then on again.
 When the template which has no object to be edited
1
Press the File key, select "Transferred Templates" using the
the OK or Enter key.
"Transferred Templates" is displayed if a template is transferred.
2
Select the template to be printed using the
Enter key.
When the template is linked to a database, the
the screen.
3
Press the Print key to start printing.
 When the template has an object to be edited
If necessary, the template can be temporarily edited. However, the template cannot be
saved after it is changed.
When the template is not linked to a database, the label will be ready to print after you
select the label template and type text into each of its fields.
When the template is linked to a database, a single record or a range of records in the
database linked to the template can be printed.
• The following procedure is for printing a single database record.
• You cannot add or delete a line break.
1
Press the File key, select "Transferred Templates" using the
the OK or Enter key.
"Transferred Templates" is displayed if a template is transferred.
or
or key and then press the OK or
icon appears in the upper-right corner of
or
Using the Data Transferred to the P-touch
ENGLISH
key and then press
key and then press
1
2
3
4
5
6
7
8
9
35