Removing Obstructions - Honda HSS928A Owner's Manual

OPERATION

REMOVING OBSTRUCTIONS

If the snow discharge chute or snow blowing mechanism becomes
restricted, review snow clearing tips (see page 37) to reduce the
possibility of reoccurring obstructions.
1.Before removing the
obstruction, be sure to stop the
engine, and make sure that all
rotating parts have come to a
complete stop. Remove the
spark plug cap from the spark
plug.
2.Remove the snow clearing bar,
or use a wooden stick to clear
the obstruction.
An obstructed auger or blower could suddenly
move when the obstruction is cleared.
Sudden auger or blower movement could
cause severe injury if your hands are being
used to clear the area.
Never clear the discharge chute or auger area
with your hands, and always stop the engine,
remove the spark plug cap, and clear
obstructions with the clearing bar.
3.After unclogging, wipe the bar clean, and secure it in the holders.
4.Reinstall the spark plug cap on the spark plug.
38
SNOW CLEARING BAR
HOLDERS