Honda HSS928A Owner's Manual page 32

OPERATION
Electric-start Models (ATD, AWD type):
a. Turn the engine switch to the
START position and release
the switch after the engine
has started. The switch auto-
matically returns to the ON
position.
Do not operate the starter for
more than 1 minute. If the
engine fails to start, release
the button and allow the
starter to cool for 15 minutes
before operating it again.
Manual Starting only
a. Turn the engine switch to the
ON position.
b. Pull the starter grip lightly
until you feel resistance, then
pull briskly in the direction of
the arrow as shown.
c. Return the starter grip gently
to the engine.
• Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
• Do not pull the starter grip while the engine is running. The starter
could be damaged.
30
OFF
DC ELECTRIC ENGINE SWITCH
STARTER GRIP
Direction to pull
ON
START