Loading - Honda HSS928A Owner's Manual

LOADING

1.Track type: Raise the auger to the HIGH position (see page 21).
2.Start the engine and maneuver the snow blower backward into line
with the loading ramp.
3.Track type: Run the snow blower backward slowly up the loading
Wheel type: Push down the handles to raise the auger and run the
Be careful to avoid striking the chute or other parts of the machine.
DOWN
UP
4.After the snow blower is in the truck, stop the engine, and turn the
fuel valve to the OFF position. This will prevent the possibility of
carburetor flooding and will reduce the possibility of fuel leakage.
5.Tie the snow blower down with rope or straps, and block the treads.
Keep the tie-down rope or straps away from controls and cables.
ramp.
snow blower up the loading ramp.
BACKWARD
L
TRANSPORTING
5 ft (1.5 m)
minimum
headroom
H
65