Simple Troubleshooting - Bosch Vero Professional User Manual

de en

Simple troubleshooting

Problem
Display shows
R
EFILL BEAN CONTAINER
although the bean container
15 is full, or the grinding unit
does not grind the beans.
No hot water dispensed.
Too little or no milk froth
or
The milk frother 10 does not
draw the milk in.
Coffee dispensing slows to
a trickle or stops completely.
Coffee has no "crema".
Coffee is too "acidic".
Coffee is too "bitter".
E
RROR
Display shows
P
LEASE CONTACT HOTLINE
If you are unable to solve the problem, please call the hotline.
40
Cause
Beans are not falling into
the grinding unit
(beans too oily).
The milk frother 10 or its
holder is soiled.
The milk frother 10 or its
holder is soiled.
Milk unsuitable for frothing.
The milk frother 10 is not
correctly assembled.
Coffee is ground too finely.
Pre-ground coffee is too
fine.
Build-up of limescale in the
appliance.
Unsuitable type of coffee.
The beans are no longer
fresh.
The grinding setting is not
suitable for the beans.
The grinding setting is too
coarse or the pre-ground
coffee is too coarse.
Unsuitable type of coffee
The grinding setting is too
fine or the pre-ground
coffee is too fine.
Unsuitable type of coffee.
The appliance has a fault.
.
Solution
Gently tap the bean
container 15.
Change the type of coffee if
necessary.
When the bean container 15
is empty, wipe it with a dry
cloth.
Clean the milk frother 10 or
its holder.
Clean the milk frother 10 or
its holder.
Use low-fat milk (1.5 % fat).
Assemble the milk frother 10
correctly.
Adjust the grinding unit to a
coarser setting. Use coarser
pre-ground coffee.
Descale the appliance.
Change type of coffee used.
Use fresh beans.
Adjust grinding setting to
fine.
Adjust the grinding unit to a
finer setting or use finer pre-
ground coffee.
Use a darker roast.
Adjust the grinding unit to a
coarser setting or use
coarser pre-ground coffee.
Change type of coffee used.
Please call the hotline.