Regency Ceiling Fans Venetian Owner's Manual page 4

U Y
NPACKING OUR
1 . Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary,
the fan should be re t u rned in original packing. Remove all parts and hard w a re. Do not lay motor housing on its side,
or the decorative housing may shift, be bent or damaged.
2. Examine all parts. You should have the following:
1. Hanging bracket
2. Ceiling canopy
3. Downrod/ball assembly
4. Decorative collar cover
5. Fan housing with motor (Remove rubber shipping
supports around motor, if included on your fan.
Save screws.)
6. Detachable switch housing with pull chain and
reverse switch
7. Pull chain with fob (2)
8. Blade arms (5)
F
AN
9. Fan blades (5)
10. Bracket hardware (wood screws, washers, wire nuts)
11. Blade arm to motor screws (located on motor) (10)
12. Blade arm to blade screws, w/washers (15)
13. Downrod pin and cotter pin
14. Balance kit
15. Housing bulbs (E12, 10w x 4)
NOTE: Design of parts shown above may look slightly
different for your specific model of fan.
3