HomeMatic HM-CFG-LAN Mounting Instruction And Operating Manual page 20

5. Connect the power supply unit supplied to the
configuration adapter and then to the 230 V
mains. The "Status" indicator light comes on
for a few seconds (during initialisation).
6. Now use the network cable supplied to con-
nect the configuration adapter to your network
router or network switch. If the "Link" indicator
light comes on or flashes with an irregular
frequency, this shows that the configuration
adapter has been connected correctly.
7. In the "Datei" program menu select the
"Einstellungen" option, then in the
"Verbindungsauswahl" window choose the
"HomeMatic LAN interface" option:
20