Boss RC-300 Owner's Manual page 31

GT->BASS
Parameter Value
FX:Level
0–100
50
FILTER settings
Parameter Value
OFF–100,
FX:Rate
50
4 MEAS–
FX:Depth
0–100
50
FX:Freq
50
0–100
FX:Resonance
1–10
7
FX:Level
0–100
80
DELAY settings
Parameter Value
Use this to choose the type of delay.
FX:Mode
SINGLE
SINGLE
PAN
FX:D.Time
400msec
1–600 msec,
1 MEAS–
FX:Feedback
0–100
20
FX:E.Level
0–120
50
LO-FI setting
Parameter Value
FX:Level
0–100
50
Explanation
Adjusts the volume level of the
effect.
Explanation
Adjusts the rate of modulation.
Adjusts the depth of modulation.
Adjusts the cutoff frequency of
the filter.
Increasing this value will raise the
cutoff frequency.
Adjusts the intensity of the effect.
Adjusts the volume level of the
effect.
Explanation
A simple monaural delay.
Provides a tap delay effect that
divides the delay time between
the left and right channels.
Adjusts the delay time.
* If the note length exceeds the
upper limit for the delay time,
some fraction of that length
(1/2, 1/4, 1/8, etc.) will be used
for synchronization.
Adjusts the number of repetitions
for the delay.
Adjusts the volume level of the
delay.
Explanation
Adjusts the volume level of the
effect.
DISTORTION settings
Parameter Value
Selects the type of effect.
FX:Mode
NATURAL OD
NATURAL OD
BLUES OD
OD-1
WARM OD
DISTORTION
MODERN DS
STACK
LOUD
METAL ZONE
60S FUZZ
FX:Drive
0–120
50
FX:Bottom
0
-50–+50
FX:Tone
-50–+50
0
FX:Level
0–100
50
Using LOOP FX
Explanation
Produces the natural sounding
distortion of a slightly overdriven
amp.
This is a unique overdrive that
faithfully reproduces the nuances
of picking.
The sound of the BOSS OD-1. It
produces sweet, mild distortion.
A warm overdrive.
This is a sharp distortion with rich
sustain.
This is the sound of a large
high-gain amp.
This is the sound of a vintage
stack-type amp.
This distortion sound is ideal for
performing heavy riffs.
This is a distortion that emphasizes
the midrange.
This is a distortion that is
distinctively rough and heavy.
Adjusts the intensity of the
distortion.
Decreasing this value will produce
a sound with the low end cut, and
increasing this value will boost the
low end in the sound.
Adjusts the tone.
Adjusts the volume level for
DISTORTION.
31