Table of Contents
Advertisement
6. MAP SETTINGS, 2D PERSPECTIVE/3D DISPLAYS AND SATELLITE OVERLAY
[CHART LANGUAGE]: Use [Language] to select the chart language to use to show
chart information (place names, etc.), among English and major European and Asian
languages. Use [Mode] to select what language to display chart information when En-
glish or language selected is not available.
[Off]: Chart information is shown in English when not available in the language select-
ed.
[English]: Chart information is shown in language selected when English is not avail-
able.
[Local]: Chart information is shown in local language when not available in the lan-
guage selected.
[CURRENTS PREDICTION]: Predict current movement in the specified time interval.
Rotate the RotoKey
Press the RotoKey
to enter the date for which to show predicted current movement.
[CHART DISPLAY]: Setup the overlay displays.
[PLOTTER WINDOW]: Select the location for the plotter display in the 2-way split
screen. The default setting puts the display on the left half.
[DISPLAY MODE]: Select the chart display mode, among [2D], [2D Perspective] and
[3D].
[OVERLAY]: Select the type of overlay to use: [Vector], [Satellite], [Raster] and [Chart
Shading] (not available in the 3D display).
[OVERLAY MODE]: Select where to display the overlay, [On Land], [On Sea] or
[On All]. (Available in 2D and 2D perspective modes when [Chart Shading] is selected
at [Overlay].)
[TRANSPARENCY]: You can set the level of transparency for the satellite photo on
the water. The higher the figure the greater the level of transparency.
[3D EXAGGERATION FACTOR]: Set the level of the 3D exaggeration factor, Level1
to Level 5, to view topographical features more easily. The higher the number the
greater the exaggeration.
6-2
SPD 1.9 kn
DIR 302° T
TM
to set the time for which to show predicted current movement.
TM
for three seconds to enable entry of date. Use the CursorPad
Advertisement
Table of Contents
Troubleshooting
