Furuno GP-1670 Operator's Manual page 31

How to select the data to display in a quarter screen, half screen navigation data
1. Display a home screen that has a quarter screen or a half screen
with navigation data.
2. Long press the HOME/CTRL key to select the data display to
change. The selected indication is circumscribed with a red rect-
angle.
3. Choose [Select Data] from the RotoKey menu.
4. Rotate the RotoKey
push the RotoKey
categories available.
5. Rotate the RotoKey
The right figure shows the choices available with [Navigation].
6. Select desired data.
Engine indications
The following engine indications are available, in the quarter screen.
• Engine speed
• Engine oil pressure
• Engine boost pressure
• Engine temperature
• Engine oil temperature
• Transmission temperature
• Transmission pressure
• Engine coolant pressure
Engine instance number
The engine instance number appears on all engine-related indications.
E-SPD 2
TM
to select the indication to change then
TM
. The [Select Data] window shows the data
TM
to select a category then push the key.
• Fuel pressure
• Trim
• Engine trim
• Fuel rate
• Total engine hours
• Distance to empty
• Engine load
Engine Instance No.
0: Single engine, or PORT engine with 2 or 3 engines
RPM
1: STARBOARD engine with 2 engines,
or CENTER engine with 3 engines
2: STARBOARD engine with 3 engines
Note: This is the standard numbering method,
Different methods can be applied.
1. OPERATIONAL OVERVIEW
POS
WPT
DIST
BRNG
XTE
TTG
ETA
Date
Time
DIST-E
1-17