Assembling The Sr-Rf8 Rigging Frame - Toa SR-C8L Operating Instructions Manual

11.2. Assembling the SR-RF8 Rigging Frame

Before assembly, first determine whether to set the mounting position of the fixing plate at the center or
forward, taking the stack system's center of gravity into consideration.
Ensure that fixing plates are correctly secured using two bolts (including plain and spring washers) supplied
with the rigging frame for each plate.
Since each fixing plate has its own installation position and orientation, assemble it referring to the figure.
Rigging frame
SR-RF8
Fixing plate
[Rear B]
Seal
Rear B
Rear Front
Front B
Rear
When attaching the fixing plate at the center
Attach at the center when the center of
gravity is shifted forward.
24
REAR
R e
R ea a r
r
B
F ro
nt
F ro
R ea n t
r B
Seal F ro
nt
Front
The center of gravity is
shifted forward.
Front
Fixing plate
Fixing plate
[Rear A]
Seal
Front Rear
Seal
Rear Front
R e
a r
F ro
n t
Fixing plate
[Front B]
When attaching the fixing plate forward
Attach forward when the center of
gravity is shifted backward
The center of gravity is
shifted backward.
Fixing plate
Seal
Rear A
Front Rear
Front
FRONT
*Mount each plate in compliance with the
indication on its corresponding seal.
Seal
Front A
Rear
Fixing plate
[Front A]
Front