Table of Contents
Advertisement
4. Install the add-in card into the connector on the riser card.
*You need to purchase a compatible riser card seperately if needed.
5. Slide the add-in card attached to the riser card into the add-in card retainer plate.
6. Lower the rear of the add-in card and align the card faceplate with the opening in the
back of the system. Gently press the riser card into the motherboard connector until
fully seated.
7. Secure the add-in card to the chassis with the screw.
22
Riser Card
Retainer Plate
6
4
5
7
Advertisement
Table of Contents
