Table of Contents
Advertisement
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Halt On [All, But Keyboard]
Allows you to select the error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]
2.5.5
Security
Boot
Supervisor
User Password
Password Check
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1.
Select an item then press <Enter>.
2.
Type in a password using a combination of a maximum of eight (8) alpha-
numeric characters, then press <Enter>.
3.
When prompted, confirm the password by typing the exact characters again,
then press <Enter>. The password field setting is changed to Set.
2-26
Phoenix - AwardBIOS CMOS Setup Utility
Security
Password
Clear
Clear
[Setup]
Select Menu
Item Specific Help
Supervisor password
controls full access,
<Enter> to change
password.
Chapter 2: BIOS setup
Advertisement
Table of Contents
