Asus P5VDC-TVMTE Manual page 36

7. ATX power connectors (24-pin ATXPWR1, 4-pin ATX12V1)
These connectors are for an ATX power supply. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
•
•
•
P5VDC-TVM TE ATX power connectors
1-26
Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the
system will not boot up.
When using an ATX 12 V PSU with 20-pin power plug, make sure that it
can provide 8 A on the +12 V lead and at least 1A on the +5V standby lead
(+5 VSB). The minimum recommended wattage is 300 W, or 350 W for a
fully configured system. The system may become unstable or may not boot
up if the power is inadequate.
You must install a Power Supply Unit (PSU) with a higher power rating if
you intend to install additional devices.
ATX12V1
+12V DC GND
+3 Volts
+12 Volts
+12 Volts
+5V Standby
+12V DC GND
Power OK
Ground
+5 Volts
Ground
+5 Volts
Ground
+3 Volts
+3 Volts
Chapter 1: Product introduction
ATXPWR1
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts