Table of Contents
Advertisement
The CPU fits in only one correct orientation. DO NOT force the CPU into the socket
to prevent bending the connectors on the socket and damaging the CPU!
6.
Close the load plate (A), then
push the load lever (B) until it
snaps into the retention tab.
7.
If installing a dual-core CPU,
connect the chassis fan cable
to the CHA_FAN1 connector to
ensure system stability.
Notes on Intel® Hyper-Threading Technology
•
This motherboard supports Intel
package with Hyper-Threading Technology.
•
Hyper-Threading Technology is supported under Windows
Server and Linux 1.7.x (kernel) and later versions only. Under Linux, use
the Hyper-Threading compiler to compile the code. If you are using any
other operating systems, disable the Hyper-Threading Technology item in
the BIOS to ensure system stability and performance.
•
Installing Windows
•
Make sure to enable the Hyper-Threading Technology item in BIOS before
installing a supported operating system.
•
For more information on Hyper-Threading Technology, visit www.intel.
com/info/hyperthreading.
To use the Hyper-Threading Technology on this motherboard:
1.
Install an Intel
Hyper-Threading Technology.
2.
Power up the system and enter the BIOS Setup (see Chapter 2: BIOS
setup). Under the Advanced Menu, make sure that the item Hyper-Threading
Technology is set to [Enabled]. The item appears only if you installed a CPU
that supports Hyper-Threading Technology.
3.
Reboot the computer.
ASUS P5VDC-TVM TE
XP Service Pack 1 or later version is recommended.
®
Pentium
4 CPU in the 775-land package that supports
®
®
B
Pentium
4 CPUs in the 775-land
®
®
A
XP/2003
®
1-9
Advertisement
Table of Contents
