Table of Contents
Advertisement
Head
Shows the number of the hard disk read/write heads. This item is not configurable.
Landing Zone
Shows the number of landing zone per track. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk utility,
such as FDISK, to partition and format new IDE hard disk drives. This is
necessary so that you can write or read data from the hard disk. Make sure to
set the partition of the Primary IDE hard disk drives to active.
2.2.6
HDD SMART Monitoring [Disabled]
Enables or disables the Hard Disk SMART capability support.
Configuration options: [Disabled] [Enabled]
2.2.7
Installed Memory [xxxMB]
Shows the size of installed memory.
2.2.8
Usable Memory [xxxMB]
Shows the size of usable memory.
2-10
Chapter 2: BIOS setup
Advertisement
Table of Contents
