Table of Contents
Advertisement
OS Select for DRAM > 64MB [Non-OS2]
Set this item to OS2 only when you are running on an OS/2 operating system with
an installed RAM of greater than 64 MB.
Configuration options: [Non-OS2] [OS2]
Full Screen LOGO [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Halt On [All Errors]
Allows you to set the error report type.
Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette]
[All, But Disk/Key]
4.6.4
Security
Security
Supervisor Password
User Password
Password Check
Supervisor Password
User Password
These fields allow you to set passwords:
To set a password:
1.
Select an item then press <Enter>.
2.
Type in a password using a combination of a maximum of eight (8)
alpha-numeric characters, then press <Enter>.
3.
When prompted, confirm the password by typing the exact characters again,
then press <Enter>. The password field setting is changed to [Set].
To clear the password:
1.
Select the password field and press <Enter> twice. The following message
appears:
PASSWORD DISABLED !!!
Press any key to continue...
ASUS M3N-H/HDMI
Phoenix-Award BIOS CMOS Setup Utility
Boot
Clear
Clear
[Setup]
Select Menu
Item Specific Help
4-33
Advertisement
Table of Contents
