Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for minrray UV950-USB3.0
Summary of Contents for minrray UV950-USB3.0
- Page 1 Minrray UV950-USB3.0 HD Color Video Camera www.Minrray.com User Manual English...
- Page 2 Preface: Thanks for using our HD color video conference camera. This manual introduces the function installation and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly. Warning This product can be only used in specified range in order to avoid any damage or danger; ●Don’t expose the camera to rain or moisture place ●Don’t remove the cover to reduce the risk of electric shock.
-
Page 3: Table Of Contents
【Contents】 1.Notes ......................1 2.Accessories ....................1 3.Fast Installation ..................... 1 4.Camera Highlights ..................4 5.Camera Specifications: ................. 4 6.Camera Interface Explanation ..............5 7.Remote Controller Explanation ..............6 8.Usage of IR Remote Controller ..............7 9.RS-232C Interface (Pin Specs) ..............9 10.COM Control ..................... -
Page 4: Notes
Notes Electric Safety Installation and operation must accord with electric safety standards. Caution to transport Avoid stress, vibration and soakage in transport, storage and installation. Polarity of power supply The power supply of the product is ±12V; the max electrical current is 2A. Polarity of the power supply as the following drawing Install Carefully Never move the camera by seizing the camera head. - Page 5 1. Please check the connection before camera power on. 2. Dial switch setting at the bottom When two DIP switch is set to ON, camera is in normal work mode. SW2-2 SW2-1 instruction Undefined Updating mode Debugging mode Working mode 3.rotary switch setting The choice of 16 rotary switch video formats Dial-up...
- Page 6 -------- -------- -------- -------- Display the video format set via OSD menu Note: need to restart the camera after switching video format. 4.When the power supply switch is “on”, the indicator light is open (red color) 5. Confirm the computer device manager has the image device "Cyt-FX3" device, and then you can find the "Cyt-FX3"...
-
Page 7: Camera Highlights
to the bottom; finally both horizontal and vertical turn to the middle position. The motor stops running, and initialization is completed. (Note: If the power-on mode is opened and saved preset position 0 or 1, then the pan/tilt will be set to 0 or 1 preset position) 10. -
Page 8: Camera Interface Explanation
Camera Interface Explanation 1.Camera lens 2.Camera base 3.Power light indicator 4.Working mode selection switch 5.Tripod screw hole 6.Installation hole 7.Video output format selection knob 8.RS232 control interface 9.USB3.0 B Male interface 10.DVI-I Video output 11.12VDC Input Power Supply Jack 12.power light indicator Dimension:... -
Page 9: Remote Controller Explanation
Remote Controller Explanation: Definition of IR controller 0、 Standby key After pressing the standby key, the camera will step into standby mode,while the front indicator light is off and sparks every 20sec.Press again,the camera will do self-checking again and back to home position.If power on mode set,it will automatically run to the preset position. -
Page 10: Usage Of Ir Remote Controller
【*】+【＃】+【F1】 ：Camera Address No.1 【*】+【＃】+【F2】 ：Camera Address No. 2 【*】+【＃】+【F3】 ：Camera Address No. 3 【*】+【＃】+【F4】 ：Camera Address No. 4 Usage of IR Remote Controller Finishing initialization, it can receive and execute the IR commands. Users can control the pan/tilt/zoom, setting and running preset positions via the IR remote controller. Key Instruction：... - Page 11 Press and hold the key, the camera will keep zooming in or zooming out and stops as soon as the key is released. Support Auto and Manual focus 3. Focus Control Focus (far)： Press 【focus+】 key Focus (near)： Press 【focus-】key Auto Focus: Press 【auto】...
-
Page 12: Rs-232C Interface (Pin Specs)
Press a number key 0-9 directly to run a relative preset. Note: Action in vain if a relative preset position does not exist. 7、 Camera Selection Select the camera number to control. 8、 Camera Remote Controller Address Setting 【*】+【＃】+【F1】 ：Camera Address No.1 【*】+【＃】+【F2】... -
Page 13: Com Control
Camera Mini DIN Function 1.DTR 1.DTR 2.DSR 2.DSR 3.TXD 3.TXD TXD 1 4.GND 4.GND 5.RXD 5.RXD RXD 1 6.RS485-A 6.GND 7.IR OUT 7.NC RS485-A 8.RS485-B 8.NC IR OUT RS485-B Camera RS485 1.DTR 2.DSR 3.TXD1 4.GND 5.RXD1 6.RS485-A 7.IR OUT 8.RS485-B 9.GND COM Control In normal working mode, the camera is able to be controlled via RS-232C/RS485 command (VISCA IN) . - Page 14 VISCA PROTOCOL Part1 Camera Return Command Ack/Completion Message Command Packet Note z0 41 FF Returned when the command is accepted. Completion z0 51 FF Returned when the command has been executed. Camera Address Error Messages Command Packet Note Returned when the command format is different or when a Syntax Error z0 60 02 FF command with illegal command parameters is accepted...
- Page 15 8x 01 04 03 02 FF Down 8x 01 04 03 03 FF Direct 8x 01 04 43 00 00 0p 0q FF pq: R Gain Reset 8x 01 04 04 00 FF 8x 01 04 04 02 FF Manual Control of B Gain CAM_Bgain Down 8x 01 04 04 03 FF...
- Page 16 6:1080P30 7:1080P25 8:720P30 9:720P25 CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF) SYS_Menu 8x 01 06 06 03 FF Turn off the menu 8x 01 06 08 02 FF IR_Receive 8x 01 06 08 03 FF IR(remote commander)receive ON/OFF On/Off 8x 01 06 08 10 FF...
- Page 17 Part3 Inquiry Command Command Command Return Packet Note packet y0 50 02 FF CAM_PowerInq 8x 09 04 00 FF y0 50 03 FF Off(Standby) CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position y0 50 02 FF Auto Focus CAM_FocusModeInq...
- Page 18 8:720P30 9:720P25 y0 50 02 FF IR_Receive 8x 09 06 08 FF y0 50 03 FF y0 07 7D 01 04 00 FF Power ON/OFF y0 07 7D 01 04 07 FF Zoom tele/wide y0 07 7D 01 04 38 FF AF On/Off IR_ReceiveReturn y0 07 7D 01 04 33 FF...
-
Page 19: Menu Setting
Pelco-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF Down 0xA0 Address 0x00 0x10 Pan Speed Tilt Speed 0xAF Left 0xA0 Address 0x00 0x04 Pan Speed Tilt Speed 0xAF Right 0xA0... - Page 20 CAMERA OPTION： camera setting PT OPTION： pan tilt setting V. FORMAT: video format setting RESET： reset setting HELP： for help 2. SYSTEM OPTION Move the pointer to the (SYSTEM SET) in the Main Menu, click the【HOME】and enter the (SYSTEM SET) as follow, SYSTEM SET ＝...
- Page 21 EXPOSURE：exposure setting IMAGE: image setting LEN: lens setting 2.1 Exposure Move the pointer to the (EXPOSURE) in the Main Menu, click the【HOME】and enter the (EXPOSURE SET) as follow, EXPOSURE SETTING ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝...
- Page 22 COLOR ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ WB.MODE R.GAIN B.GAIN GAMMA SATURATION APERTURE FLICK 50HZ LEVEL CONTRAST BACK／ Ｍ Ｅ Ｎ Ｕ WB MODE：Reset Condition: ATW White balance mode setting: Auto、Indoor、Outdoor、OnePush、ATW、Manual R.GAIN：Reset Condition:Default Red gain setting：0~50（only available in Manual mode）...
- Page 23 PT SET ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ POWER. ACT SPEEDBYZ MOUNT. MODE IR M.SPEED IR Z.SPEED MIN.SPEED SCAN. SPEED BACK／ Ｍ Ｅ Ｎ Ｕ POWER ACT： Reset Condition: OFF 返...
-
Page 24: Troubleshooting
6. HELP Show instruction of the OSD menu operation HELP ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ ＝ SELET MENU ∧ ∨ CHANGESETTING ＜ ＞ Ｈ Ｏ Ｍ Ｅ ENTER RETURN Ｍ Ｅ Ｎ Ｕ BACK／... - Page 25 Check whether the video connecting wires is well and other connecting sockets and camera flat wires are well. The camera can only works at one focus, other position can not be focused. Change the position to see if this phenomenon still exists. If yes, it may be caused by Camera control drive focus control system trouble.
Need help?
Do you have a question about the UV950-USB3.0 and is the answer not in the manual?
Questions and answers