minrray UV570 Series User Manual
  1. Manuals
  2. Brands
  3. minrray Manuals
  4. Security Camera
  5. UV570
  6. User manual

minrray UV570 Series User Manual

Universal hd ptz camera
Hide thumbs Also See for UV570 Series:
Table of Contents

Advertisement

Quick Links

Universal Camera
HD PTZ Camera
User Manual
（V1.0）

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UV570 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for minrray UV570 Series

Summary of Contents for minrray UV570 Series

  • Page 1 Universal Camera HD PTZ Camera User Manual （V1.0）...
  • Page 2 FHD PTZ Camera  User Manual Preface This manual is to ensure that the user can use the product properly and avoid danger while operating. Before using this product, please read the user manual carefully and keep it properly for future reference Overview This manual is about PTZ camera operation Graphic Symbols...
  • Page 3 FHD PTZ Camera  User Manual Attention This manual introduces functions, installations and operations for this product in details. Please read this manual carefully before installation and use. Precautions: This product can only be used in the specified conditions in order to avoid any damage to the camera: 1) Do not expose the product to rain or moisture.
  • Page 4 FHD PTZ Camera  User Manual Magnetic Interference Electromagnetic fields at specific frequencies may affect the video image. This product is Class A. It may cause radio interference in household application. Appropriate measure is required.

  • Page 5: Table Of Contents

    FHD PTZ Camera  User Manual Content Quick Start ......................... 1 1.1 Interface ........................ 1 1.2 Connection Diagram ....................2 1.3 Mounting Brackets ....................3 1.3.1 Wall Mount ....................3 1.3.2 Ceiling Mount ....................4 Product Overview ....................... 6 2.1 Dimension ......................6 2.2 Accessory ......................
  • Page 6 FHD PTZ Camera  User Manual 5.1.2 Camera Control Command ................32 5.1.3 Inquiry Command ..................40 5.2 Pelco-D Protocol Command List ................44 5.3 Pelco-P Protocol Command List ................47 Maintenance and Troubleshooting ..................50 6.1 Camera Maintenance .................... 50 6.2 Unqualified Applications ..................

  • Page 7: Quick Start

    FHD PTZ Camera  User Manual Quick Start 1.1 Interface Figure1-1 Interface Interface Introduction： 1, Lens 7, HDMI Output 13, RS422 Compatible with RS485 Interface 8, USB3.0 14. LAN Port 2, Base 3, Receiving Light 9, Audio Input 15, Power Input Socket(DC12V) Interface(LINE-IN) 4, Infrared Receiver 10, Rotary Dial...

  • Page 8: Connection Diagram

    FHD PTZ Camera  User Manual 1.2 Connection Diagram Figure1-2 Connection Diagram 1) After power on and self-check, the camera will automatically return to the preset 0 position if it’s pre-set. 2) The default address for the IR remote control is 1#. If the menu restored to factory defaults, the remote control default address will restore to 1#.

  • Page 9: Mounting Brackets

    FHD PTZ Camera  User Manual 1.3 Mounting Brackets  Ceiling or wall mounting brackets can only be mounted on template and concrete wall. For safety reason, plasterboard is not recommended. 1.3.1 Wall Mount...

  • Page 10: Ceiling Mount

    FHD PTZ Camera  User Manual 1.3.2 Ceiling Mount...
  • Page 11 FHD PTZ Camera  User Manual...

  • Page 12: Product Overview

    FHD PTZ Camera  User Manual Product Overview 2.1 Dimension Figure1-3 Product Dimension 2.2 Accessory When you unpack your package, check that all the supplied accessories are included: Table1-1 Supplied Accessory Power adapter USB3.0 Cable Supplied RS232 cable User manual...

  • Page 13: Rs-232

    FHD PTZ Camera  User Manual Plastic pad Wireless remote control IR Remote Control Optional Brackets for wall mounting Brackets for ceiling mount Cascading Cable 2.3 RS-232 1）RS-232 Jack Connection method of camera to PC or Controller. Camera WindowsDB-9 1.DTR 1.DCD 2.DSR 2.RXD...
  • Page 14 FHD PTZ Camera  User Manual 2）RS-232 Mini-DIN 8-pin Terminal Definition Port Definition Data Terminal Ready Data Set Ready Transmit Data Signal Ground Receive Data Signal Ground Commander IR OUT Signal No Connection Table 1-8 RS-232 Mini-DIN 8-pin Port Definitions 3）RS232(DB9) Port Definition Table 1-9 RS232(DB9) Port Definition Port...
  • Page 15 FHD PTZ Camera  User Manual Request to Send Clear to Send Ring Indicator 4）VISCA Networking Method Networking Method Device 1 Device2 1.DTR 1.DTR 2.DSR 2.DSR 3.TXD 3.TXD 4.GND 4.GND 5.RXD 5.RXD 6.GND 6.GND 7.IR OUT 7.OPEN 8. NC 8.OPEN Figure1-5 Diagram of Networking Method ...

  • Page 16: Rotary Dial

    FHD PTZ Camera  User Manual 2.4 Rotary Dial Figure1-6 Rotary dial corresponding to video format Dial Video Format Dial Video Format 1080P60 720P59.94 1080P50 ----- 1080P30 ----- 1080P30 ----- 720P60 ----- 720P50 ----- 1080P59.94 ----- 1080P29.97 -----  After switching the mode and dialing the code, you need to restart the camera to take effect;...
  • Page 17 FHD PTZ Camera  User Manual  Low Noise and High SNR: Super high SNR image is achieved with low noise CMOS. Advanced 2D/3D noise reduction technology further reduces the noise while ensuring high image clarity.  Multiple video output interfaces: HDMI, USB3.0, LAN. Simultaneously output audio and video signal via HDMI, LAN interface support POE, USB 3.0 support dual code stream, ...

  • Page 18: Technical Specification

    FHD PTZ Camera  User Manual 2.6 Technical Specification Table1-2 Camera Lens Parameter Camera Parameter Parameter/Model 3.9～46.8mm 5.2～98mm Focus 6.3° （N） 72.5° （W） 3.2° （N）56° （W） F1.8 ～ F2.4 F1.5 ～ F3.0 Aperture Value Effective Pixels 2.07, 1/2.8-inch high-quality CMOS sensor HDMI Output: 1080P60,1080P50,1080P30,1080P25,720P60,720P50, 1080P59.94,1080P29.97,720P59.94；...
  • Page 19 FHD PTZ Camera  User Manual Automatic, manual, one-key white balance, specified color temperature Automatic, manual, one-key focus Focus Mode Auto, manual, shutter priority, aperture priority, brightness priority Exposure Mode F1.8 -- F11,CLOSE Iris Value 1/25 -- 1/10000 Shutter Speed On/off Off, 1-8 Dynamic Range...
  • Page 20 FHD PTZ Camera  User Manual 10M/100M/1000M adaptive Ethernet port, support POE power LAN Interface supply, support audio and video output RTSP,RTMP,ONVIF,GB/T28181,VISCA OVER IP,IP VISCA,RTMPS,SRT Support remote upgrade, remote restart, Network Protocol remote reset RS232-IN,RS232-OUT,RS422 compatible with RS485 Control Interface Serial VISCA/Pelco-D/Pelco-P;...
  • Page 21 FHD PTZ Camera  User Manual Other Parameter Storage -10℃ -- +70℃ Temperature 20% -- 95% Storage Humidity Working -10℃ -- +50℃ Temperature 20% -- 80% Working Humidity 181mm×115mm×149mm Dimension 1.15kg Weight Indoor Environment Accessory Standard Power adapter, RS232 control line, USB3.0 connection line, Accessory remote control, manual, warranty card &...

  • Page 22: How To Use

    FHD PTZ Camera  User Manual How To Use 3.1 Remote Control Remote control using instruction: There are wireless remote control and IR remote control for options. Steps for wireless remote control usage are as below: 1）Code Pairing Press the "Settings" + "*" button for 3 seconds, the LED will turn off to flashing, after releasing the button, the LED light will keep flashing to start the code pairing, the receiver is powered on, and the LED will be off when the code pairing is successful;...

  • Page 23: Ir Remote Control

    FHD PTZ Camera  User Manual 3.2 IR Remote Control 1. Standby Key After 3S long press, the camera will step into standby mode. Long press 3S again, the camera will self-test again and back to HOME position. (Note: If power-on mode is turned on and Preset 0 is set, and there is no operation within 12s, it will automatically point to the specified preset position.
  • Page 24 FHD PTZ Camera  User Manual 9. BLC Control Key Back Light ON / OFF: Turn on or off the back light 10. Menu Setting Open or close the OSD menu Enter / exit the OSD menu or return to the previous menu. 11.

  • Page 25: Remote Control Usage

    FHD PTZ Camera  User Manual 13. AI Function Short Keys 【F1】 ：Turn off AI Human Detection 【F2】 ：Turn on AI Human Detection 【F3】 ：Toggle between real time tracking mode and region tracking mode 【F4】 ：Chang tracking target on real tracking mode 3.2.1 Remote Control Usage Finishing initialization, it can receive and execute the IR commands.
  • Page 26 FHD PTZ Camera  User Manual ZOOM IN: press “ZOOM “ key ZOOM OUT: press “ZOOM ” key Press and hold the key, the camera will keep zooming in or zooming out and stops as soon as the key is released. 4) Focus Control Focus (near):Press “【focus+】”...

  • Page 27: Menu Setting

    FHD PTZ Camera  User Manual and then press the number key 0-9 to clear the relative preset; Note : press the“【#】” key three times continually to cancel all the presets. 7）Camera Remote Controller Address Setting 【*】+【＃】+【F1】:Camera Address No.1 【*】+【＃】+【F2】:Camera Address No. 2 【*】+【＃】+【F3】:Camera Address No.

  • Page 28: English Menu

    FHD PTZ Camera  User Manual 3.3.2 English Menu...

  • Page 29: Network Connection

    FHD PTZ Camera  User Manual Network Connection 4.1 Connection Method Direct Connection：Direct connections via “cross-over” network cable Connection to LAN：Connections to LAN via patch cable to LAN wall jack or LAN switch  Please do not put the power and network cable in places where can be easily touched to prevent video quality lowered by unstable signal transmission due to poor contact of cables.

  • Page 30: Camera Web Interface

    FHD PTZ Camera  User Manual Figure1-7 Network segment successfully added User can also to verify network connection as steps above mentioned after the finish of camera self-check. If IP is default, open DOS command window and input 192.168.5.163, then press Enter key. It will show message as below: which means network connection is normal.

  • Page 31: Streaming

    FHD PTZ Camera  User Manual 1）Web Login After assigning an IP address to the camera, you can reach the Web Interface by typing in the camera’s IP address into a web browser. You can log in this interface as administrator or user.
  • Page 32 FHD PTZ Camera  User Manual Configure the parameters according to the network environment. Note: stream name live/av0 (live/ XXX) For example: The default IP address of the camera is 192.168.5.163. The way to obtain the RTSP video stream is as below rtsp://192.168.5.163:554/live/av0（av0 main stream）...

  • Page 33: Software Upgrading

    FHD PTZ Camera  User Manual Push RTMP stream to public network server, the stream camera must be on the public network, otherwise it will fail to connect to server. Host address: server address, which can be either a domain name or an IP address Host port: server default port number Stream name: live/test (live/ XXX) Username and password: the username and password set by the server, or leave it...

  • Page 34: Webpage Configuration For Human

    FHD PTZ Camera  User Manual 3). Click "browse" to select .mrg update file, then click upgrade button to finish software upgrading. 4). Camera reboot after completion of firmware update. It prompts with "successful upgrade". Log in to check the firmware version to make sure software upgrade successful. Then click "restore factory default", reboot and restore parameters to factory default (default IP 192.168.5.163, user name: admin;...
  • Page 35 FHD PTZ Camera  User Manual Regional Settings Steps (We take Region1 as an example): 1. On the PTZ Area, adjust image by clicking direction buttons to select one region. 2. After finishing region1 setting, click “Set” to complete the Region1 Tracking. Other region settings are same as region1 setting steps.
  • Page 36 FHD PTZ Camera  User Manual...

  • Page 37: Serial Port Communication Port

    FHD PTZ Camera  User Manual Serial Port Communication Port In normal working state, you can control the camera through RS232/RS485 (VISCA IN) cable. The parameter of RS232 is as below: Baud rate: 2400/4800/9600/115200/second Start Bit：1 bit； Data Bit：8 bit； Stop Bit：1 bit；...

  • Page 38: Camera Control Command

    FHD PTZ Camera  User Manual command could not be accepted when received. Returned when a command which is being Command z0 6y 04 FF(y: executed in a socket specified by the cancel Canceled Socket No.) command is canceled. The completion message for the command is not returned.
  • Page 39 FHD PTZ Camera  User Manual Command Function Command Packet Remark Near(Standard) 8x 01 04 08 03 FF Far(Variable) 8x 01 04 08 2p FF p = 0(low) - 7(high) Near (Variable) 8x 01 04 08 3p FF 8x 01 04 48 0p 0q Direct pqrs: Focus Position 0r 0s FF...
  • Page 40 FHD PTZ Camera  User Manual Command Function Command Packet Remark 3500K 8x 01 04 35 07 FF 4500K 8x 01 04 35 08 FF 5500K 8x 01 04 35 09 FF 6000K 8x 01 04 35 0A FF 7000K 8x 01 04 35 0B FF One Push WB Trigger(Enabled during...
  • Page 41 FHD PTZ Camera  User Manual Command Function Command Packet Remark Iris Priority Automatic Iris priority 8x 01 04 39 0B FF Exposure mode Bright 8x 01 04 39 0D FF Bright mode Reset 8x 01 04 0A 00 FF 8x 01 04 0A 02 FF Shutter Setting CAM_Shutter...
  • Page 42 FHD PTZ Camera  User Manual Command Function Command Packet Remark 8x 01 04 4E 00 00 Direct pq: ExpComp Position 0p 0q FF 8x 01 04 33 02 FF Back Light CAM_Back Light Compensation 8x 01 04 33 03 FF Reset 8x 01 04 21 00 FF 8x 01 04 21 02 FF...
  • Page 43 FHD PTZ Camera  User Manual Command Function Command Packet Remark 8x 01 04 42 00 00 Direct pq: Aperture Gain 0p 0q FF B&W-Mode 8x 01 04 63 04 FF CAM_Picture Picture effect Setting effect 8x 01 04 63 00 FF 8x 01 04 3F 00 pq Reset pq: Memory Number(=0...
  • Page 44 FHD PTZ Camera  User Manual Command Function Command Packet Remark CAM_Setting Reset 8x 01 04 A0 10 FF Reset Factory Setting Reset CAM_Brightn 8x 01 04 A1 00 00 Direct pq: Brightness Position 0p 0q FF CAM_Contra 8x 01 04 A2 00 00 Direct pq: Contrast Position 0p 0q FF...
  • Page 45 FHD PTZ Camera  User Manual Command Function Command Packet Remark 8x 01 06 01 VV WW DownRight 02 02 FF 8x 01 06 01 VV WW Stop 03 03 FF 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z AbsolutePosition 0Z 0Z FF 8x 01 06 03 VV WW...

  • Page 46: Inquiry Command

    FHD PTZ Camera  User Manual 5.1.3 Inquiry Command Command Command Return Packet Remark Packet y0 50 02 FF CAM_PowerIn 8x 09 04 00 FF y0 50 03 FF Off(Standby) CAM_ZoomPo y0 50 0p 0q 0r 0s 8x 09 04 47 FF pqrs: Zoom Position sInq y0 50 02 FF...
  • Page 47 FHD PTZ Camera  User Manual Command Command Return Packet Remark Packet y0 50 00 FF 6500K y0 50 06 FF 6500K y0 50 07 FF 3500K y0 50 08 FF 4500K y0 50 09 FF 5500K y0 50 0A FF 6000K y0 50 0B FF 7000K...
  • Page 48 FHD PTZ Camera  User Manual Command Command Return Packet Remark Packet y0 50 02 FF CAM_ExpCo 8x 09 04 3E FF mpModeInq y0 50 03 FF CAM_ExpCo y0 50 00 00 0p 0q 8x 09 04 4E FF pq: ExpComp Position mpPosInq y0 50 02 FF CAM_Backligh...
  • Page 49 FHD PTZ Camera  User Manual Command Command Return Packet Remark Packet turationInq (60%) to Eh (130%) CAM_IDInq 8x 09 04 22 FF y0 50 0p FF p: Camera ID y0 50 02 FF IR_ReceiveInq 8x 09 06 08 FF y0 50 03 FF CAM_Brightne y0 50 00 00 0p 0q...

  • Page 50: Pelco-D Protocol Command List

    FHD PTZ Camera  User Manual Command Command Return Packet Remark Packet 4:1080P30 5:1080P25 6:720P60 7:720P50 8：1080P59.94 9：1080i59.94 A：1080P29.97 B：720P59.9 Pan- ww: Pan Max Speed tiltMaxSpeedI 8x 09 06 11 FF y0 50 ww zz FF zz: Tilt Max Speed y0 50 0w 0w 0w 0w wwww: Pan Position Pan-tiltPosInq...
  • Page 51 FHD PTZ Camera  User Manual Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Tilt Upright 0xFF Address 0x00 0x0A Speed Speed Tilt DownLeft 0xFF Address 0x00 0x14 Speed Speed Tilt DownRight 0xFF Address 0x00 0x12 Speed Speed Zoom In 0xFF Address 0x00...
  • Page 52 FHD PTZ Camera  User Manual Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Query Zoom Value Value Position 0xFF Address 0x00 0x5D High Byte Response Byte...

  • Page 53: Pelco-P Protocol Command List

    FHD PTZ Camera  User Manual 5.3 Pelco-P Protocol Command List...
  • Page 54 FHD PTZ Camera  User Manual Byte Byte Byte Byte Function Byte1 Byte2 Byte5 Byte6 Tilt 0xA0 Address 0x00 0x08 0xAF XOR Speed Speed Tilt Down 0xA0 Address 0x00 0x10 0xAF XOR Speed Speed Tilt Left 0xA0 Address 0x00 0x04 0xAF XOR Speed Speed...
  • Page 55 FHD PTZ Camera  User Manual Query Pan Value Value Position 0xA0 Address 0x00 0x59 High 0xAF XOR Response Byte Byte Query Tilt 0xA0 Address 0x00 0x53 0x00 0x00 0xAF XOR Position Query Tilt Value Value Position 0xA0 Address 0x00 0x5B High 0xAF XOR...

  • Page 56: Maintenance And Troubleshooting

    FHD PTZ Camera  User Manual Maintenance and Troubleshooting 6.1 Camera Maintenance 1）If the camera will not be used for a long time, please turn off the power switch. 2）Use a soft cloth or lotion-free tissue to clean the camera body. 3）Use a soft dry lint-free cloth to clean the lens.
  • Page 57 FHD PTZ Camera  User Manual 2. Check the building and any supporting furniture for vibration. Ceiling mounts are often affected by building vibration more than wall mounts. 3. Any external vibration that is affecting the camera will be more apparent when in tele zoom (zoomed in)
  • Page 58 Copyright Notice The entire contents of this manual, whose copyright belongs to Minrray Industry Co.,Ltd, may not be cloned, copied or translated in any way without the explicit permission of the company. Product specifications and information referred to in this document are for reference only and as such are subject to updating at any...

Table of Contents