Motion Alarm; Extra Alarm - Digital Watchdog VMAX960H CORE User Manual

Real-time 960h recording
Table of Contents

Advertisement

4.2.4 Motion Alarm

Select Motion alarm to record only when motion detection is triggered by DVR S/W upon user's defined motion area.
An alarm signal is sent via the selected sensor-out channel. To enable, check the box next to each channel, select the
notification option (beep and/ or camera popup), select to enable a relay output when motion alarm is triggered, and set the
dwell time for recording.
Notify- Select how to alert when a sensor is activated or motion is triggered. The system can generate a buzzer
sound and/or have a pop-up screen for the camera.
Relay- OFF/ON- enable or disable relay output when a sensor is activated.
Dwell Time- Set the recording period from the start of sensor activation. During this period, the corresponding camera
will record according to the frame and alarm (relay) output set. The recording stops and alarm output is turned off
when the dwell time ends.
Copy Setting- you can copy the settings from one sensor input to multiple sensors for easy and quick configuration.
Choose the sensor you want to copy from at the "From" field. Choose the settings you want to copy by selecting the
check box next to each one. Check the checkbox next to the sensor numbers to apply the copy setting(s) to on the
"To" box.
"Motion Alarm" here means alarm triggered by motion detection set by motion menu of DVR.
N
OTE

4.2.5 Extra Alarm

HDD S.M.A.R.T. is triggered when the HDD is about to be out of operation. This alarm is triggered by the HDD, and therefore
will not be functional if the HDD does not support HDD S.M.A.R.T notifications.
Users also set the percentage for HDD
Usage. For example, when usage is 50%
(DVR is 50% full), the DVR will notify by a
camera popup or a beep.
You can also setup system notifications for
video loss, recording failure, and fan failure.
Users also set the percentage for HDD
Usage. For example, when Usage is 50%,
DVR will notify by a camera popup or a beep
sound when HDD is 50% full.
User's Manual | 40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents