Memory Installation - Gigabyte 6OXET Series User Manual

Memory Installation

The motherboard has 4 dual inline memory module (DIMM) sockets support 6 banks. The BIOS
will automatically detects memory type and size. To install the memory module, just push it
vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch.
Memory size can vary between sockets.
Install memory in any combination table:
Location 168-pin SDRAM DIMM Modules
Single – Sided
DIMM1
(Bank 0,1)
Double – Sided
DIMM2 Single – Sided
(Bank 2,3)
Double – Sided
DIMM3 Single – Sided
(Bank 4,5)
Double – Sided
DIMM4 Single – Sided
(Bank 4,5)
Double – Sided
Total System Memory (Max 512MB)
★Supports 16 / 32 / 64 / 128 / 256/ 512 MB SDRAM DIMM Modules.
Note:
1. DIMM 4 is optional.
2. When you're using single-sided memory on DIMM4, you must use single-sided memory on
DIMM3. If you use double-sided memory on DIMM4, please do not insert any memory on DIMM3.
DIMM4 have only single-sided
DIMM4 must be empty
DIMM3 must install single-sided
DIMM3 must be empty
60
Memory Installation
Note