Gigabyte 6OXET Series User Manual page 89

• • • •
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode.
SCR Set onboard I/O chip UART to SCR Mode.
Set onboard I/O chip UART to Normal Mode. (Default Value)
Normal
• • • •
UR2 Duplex Mode
Half
Full
• • • •
Onboard Parallel port
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
378/IRQ7
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
• • • •
Parallel Port Mode
Using Parallel port as Standard Parallel Port. (Default Value)
SPP
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
• • • •
AC Back Function
Memory System power on depends on the status before AC lost.
Always in Off state when AC back. (Default value)
Soft-Off
Full-On Always power on the system when AC back.
• • • •
Game Port Address
Disabled Disabled this function.
Set onboard game port to 201. (Default value)
201
209 Set onboard game port to 209.
IR Function Duplex Half. (Default Value)
IR Function Duplex Full.
82
BIOS Setup