Linksys SFE2010 Admin Manual page 65

Access Control ACLs - Drop or Rate Limit based on:
Source and Destination MAC-based
Source and Destination IP address
Protocol
Port
VLAN
DSCP/IP Precedence
TCP/UDP Source and Destination ports
802.1p priority
Ethernet Type
ICMP packets
IGMP packets
DHCP Snooping
ARP Inspection
IP Source Address Guard
Up to 1018 rules
Link Aggregation Link Aggregation using IEEE 802.3ad LACP
Up to 8 ports in up to 8 groups
Storm Control Broadcast, Multicast and Unknown Unicast
DOS prevention DOS Attack prevention
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, IEEE 802.1s Multiple
Spanning Tree, Fast Linkover
IGMP Snooping IGMP (v1/v2) snooping limits bandwidth-intensive video traffic to only the
requestors. Support 256 multicast groups.
Power Redundancy Connection to RPSU for power redundancy
QoS Priority levels: 4 Hardware queues
Scheduling: Priority Queuing and Weighted Round Robin (WRR)
Class of Service:
•
•
•
•
•
Rate Limiting:
•
•
•
Statistics: 16 meters
Standards 802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab 1000BASE-T
Gigabit Ethernet, 802.3z Gigabit Ethernet, 802.3x Flow Control, 802.3 ad LACP,
802.1d STP, 802.1Q/p VLAN, 802.1w Rapid STP, 802.1s Multiple STP, 802.1x Port
Access Authentication
Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/
23/EEC directives, which include the safety and EMC standards listed below.
SFE2010/SFE2010P Administration Guide
Port-based
802.1p VLAN priority based
IPv4/v6 IP Precedence/TOS/DSCP based
Diffserv
Classification and Remarking ACLs
Ingress policer
Egress rate control
Per VLAN
62