Connecting Devices; Sample Network Configuration; Maximum Cabling Distances - Linksys SFE2010 Admin Manual

3

Connecting Devices

This chapter explains how to physically connect your network devices to the switch.
• "Sample Network Configuration, " on page 5
• "Maximum Cabling Distances, " on page 5
• "Before You Install the Switch... , " on page 6
• "Placement Options, " on page 6
• "Connecting the Cables, " on page 8

Sample Network Configuration

For an example of a possible network configuration, see the application diagrams shown
below.

Maximum Cabling Distances

When you connect your network devices, make sure you don't exceed the maximum cabling
distances, which are listed in the following table:
From
Switch
Hub
Switch or Hub
*A hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A
10Mbps hub connected to another 10Mbps hub can span up to 100 meters (328 feet).
SFE2010/SFE2010P Administration Guide
To
Switch or Hub*
Hub
Computer
Connecting Devices
Sample Network Configuration
Maximum Distance
100 meters (328 feet)
5 meters (16.4 feet)
100 meters (328 feet)
5