Country Name
Validity Term
Show Certificate
Use the Show Certificate screen to display the internal certificate.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration Menu, select 4. Security Settings.
3. From the Security Settings Menu, select 2. SSL Show Certificate.
4. When you finish using this screen, select Quit.
Disable Active Management Access Profile
You can use select option 3 on the Security Settings menu to disable the active management
access profile.
To disable the active management access profile:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration menu, select 4. Security Settings.
3. From the Security Settings Menu, select 3. Disable Active Management Access Profile.
4. When the confirmation message appears, press Y to confirm, or press N to cancel.
SFE2010/SFE2010P Administration Guide
Specifies the country name. (Range: 2 to 2)
Specifies number of days certification is valid. (Range: 30 to
3650)
Using the Console
System Configuration
27