Password Setting - Gigabyte GA-486AM User Manual

GA-486AM
______________________________________________________________________

4.12PASSWORD SETTING

PASSWORD SETTING
When you select this function, the following message will appear at the center of the screen
to assist you in creating a password.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMEN
PCI / GREEN FUNCTIO
LOAD BIPS DEFAULTS
ESC : Quit
F10 : Save & Exit Setup
Type the password, up to eight characters, and press <Enter>. The password typed now
will clear and previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection and not to enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A
message will confirm the password being disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
PASSWORD DISABLED
If you select System at Security Option of BIOS Features Setup Menu, you will be prompted
for the password every time the system is rebooted or any time you try to enter Setup. If you
select Setup at Security Option of BIOS Features Setup Menu, you will be prompted only
when you try to enter Setup.
______________________________________________________________________
ROM PCI/ISA BIOS ( 2A4X5G03 )
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
LOAD SETUP DEFAULTS
PASSWORD SETTING
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
Enter Password:
EXIT WITHOUT SAVING
(Shift)F2
Change / Set / Disabled Password
4-23
: Select Item
: Change Color