Bios Features Setup - Gigabyte GA-486AM User Manual

GA-486AM
______________________________________________________________________

4.6 BIOS FEATURES SETUP

Security Option
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
IDE HDD Block Mode
IDE 32-bit Transfer Mode
IDE PIO Mode 3 Support
IDE Second Channel Control
•
Security Option
The default value is Setup.
Setup Asking password when enter CMOS Setup.
System Asking password when enter CMOS Setup and boot system.
•
Virus Warning
This category flashes on the screen. During and after the system boots up, any attempt
to write to the boot sector or partition table of the hard disk drive will halt the system and
the following error message will appear, in the mean time, you can run anti-virus
program to locate the problem. The default value is Disabled.
Enabled Activate automatically when the system boots up and causes a
warning message to appear when anything attempts to access to the
boot sector or hard disk partition table.
Disabled No warning message to appear when anything attempts to access to
the boot sector or hard disk partition table.
•
CPU Internal Cache / External Cache
These two categories speed up memory access. However, it depends on CPU / chipset
design. The default value is Enabled.
Enabled Enable cache.
Disabled Disable cache.
______________________________________________________________________
ROM PCI/ISA BIOS ( 2A4X5G03 )
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Setup Video BIOS Shadow
: Disabled C8000 - CBFFF Shadow
: Enabled CC000 - CFFFF Shadow
: Enabled D0000 - D3FFF Shadow
: Enabled D4000 - D7FFF Shadow
: A, C D8000 - DBFFF Shadow
: Disabled DC000 - DFFFF Shadow
: Enabled
: Off
: Disabled
: Disabled
: Disabled
: Enabled
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
4-11
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color