Gigabyte GA-486AM User Manual page 36

______________________________________________________________________
•
HDD Power Down
The default value is Disabled.
Disabled Disable HDD Power Down mode function.
1 - 15 Enable HDD enter Power Down mode between 1 to 15 mins.
Mins
•
Network Card Installed
The default value is NO.
YES Network Card Installed.
NO Network Card not Installed.
If you set "Network Card Installed" to "Yes", the JP4 Green LED will not be light when
system get into Green mode.
•
PM Control By APM
The default value is Disabled.
Enabled BIOS will combine DOS 6.2 (power.exe) & Windows 3.1 (DOS with
APM) to get into Green mode.
Disabled BIOS will not combine DOS 6.2 (power.exe) & Windows 3.1 (DOS
with APM) to get into Green mode.
•
Non-S CPU PMI IRQ
The default value is IRQ10.
IRQ10 use IRQ10 to close monitor in DOS system only.
¡ ° T his option is for Non-S CPU only. (AMD not Enhance) If you use S CPU, you will not
see this option.
•
Monitor PCI1-3 Master Card.
The system gets into green mode or not depending on the status of PCI1-3 Master
Card, Video Action. The default value is Enabled.
Enabled System will not get into green mode when PCI1-3 Master Card, Video
Action is active.
Disabled System will get into green mode no matter what PCI1-3 Master Card,
Video Action is active or not.
•
Monitor I/O port
System will not get into green mode when I/O port is active.
The default value is 300h ~ 33Fh.
I/O port include:
______________________________________________________________________
100h ~ 13Fh, 140h ~ 17Fh
180h ~ 1BFh, 1C0h ~ 1FFh
200h ~ 23Fh, 240h ~ 27Fh
280h ~ 2BFh, 2C0h ~ 2FFh
300h ~ 33Fh, 340h ~ 37Fh
380h ~ 3BFh, 3C0h ~ 3FFh
Disabled
4-18
BIOS Configuration