Pci /Green Function Setup - Gigabyte GA-486AM User Manual

GA-486AM
______________________________________________________________________

4.9 PCI /GREEN FUNCTION SETUP

Slot 1 Using INT#
Slot 2 Using INT#
Slot 3 Using INT#
GA-410 Using INTA IN
1st Available IRQ
2nd Available IRQ
3rd Available IRQ
4th Available IRQ
PCI IRQ Actived By
Onboard PCI IDE
•
SLOT 1~3 Using INT#
The default value is AUTO.
AUTO The BIOS auto detect the PCI device using INTA ~ D and auto set up a
available IRQ to let device use.
A ~ D For some not PCI specification compliant device, the user must set up IRQ
manually.
•
GA-410 Using INTA IN
The default value SLOT1.
The GA-410 NCR 810 PCI SCSI card has a Jumper to select the card to be Primary
or Secondary card. If the card is been set up to Primary then the user must set up the
selection correctly (and the INT#A must be used). If the card is been set up to
Secondary then the user only set up the above selections.
•
Available IRQ
The default value is shown on the above table.
These available IRQs are Mapped to be PCI INT# by BIOS for PCI device
automatically. If some one IRQ is used by ISA device then the user must keep the IRQ
out of the available table.
______________________________________________________________________
ROM PCI/ISA BIOS ( 2A4X5G03 )
PCI / GREEN FUNCTION SETUP
AWARD SOFTWARE, INC.
: AUTO *WakeUp Event In Inactive Mode:
: AUTO Monitor IRQ3
: AUTO Monitor IRQ5
: SLOT1 Monitor IRQ7
: 11 Monitor IRQ9
: 12 Monitor IRQ10
: 9 Monitor IRQ12
: 10
: Edge
: Enabled
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
4-19
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color