Advertisement
MODE :
5
Each time you press this button, a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT *, as the following:
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will
automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
I FEEL:
6
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature. Press this
button again to cancel I FEEL function.
7
Press this button to set HEALTH function ON or OFF. After the unit is turned on, it defaults to HEALTH function ON.
8
Press this button to select AIR function ON or OFF.
CLOCK :
9
Pressing CLOCK button,
seconds increases or decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after
setting, press CLOCK button again to confirm the setting, and then
TIMER ON :
10
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After pressing this button,
to adjust the time value. Every press of either button changes the time setting by 1 minute. Holding down either button rapidly changes
the time setting by 1 minute and then 10 minutes. Within 5 seconds after setting, press TIMER ON button to confirm.
11
Press this button to set up & down swing angle, which circularly changes as below:
This remote controller is universal. If any command , or is sent out,
indicates the guide louver swings as:
X-FAN:
12
Pressing X -FAN button in COOL or DRY mode, the icon
order to dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not available
in AUTO, FAN or HEAT mode.
TEMP:
13
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the indoor unit firstly power
on it will display the setting temperature, if the temperature's displaying status is changed from other status to"
temperature, 5s later or within 5s, it receives other remote control signal that will return to display the setting temperature. if the users
haven't set up the temperature displaying status,that will display the setting temperature.
TIMER OFF :
14
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again.TIMER OFF setting is the
same as TIMER ON.
AUTO
COOL
*Note: Only for models with heating function.
blinks. Within 5 seconds, pressing + or - button adjusts the present time. Holding down either button above 2
disappear sand " ON " blink s . 00:00 is displayed for ON time setting. Within 5 seconds, press + or - button
AUTO
DRY
FAN
HEAT *
will be constantly displayed.
，
，
the unit will carry out the command as
is displayed and the indoor fan will continue operation for 10 min utes in
",displays the ambient
Advertisement
