When installing:
Ensure that the connectors are attached firmly and the cables are routed as shown in the following illustration.
1040 Hard disk drive, hybrid drive, or solid-state drive
For access, remove this FRU:
•
"1020 Base cover" on page 60
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Removal steps of the hard disk drive, hybrid drive, or solid-state drive
Note: Remove the screws that secure the hard disk drive, hybrid drive, or solid-state drive
1
. Then slide the
2
a
hard disk drive, hybrid drive, or solid-state drive as shown
to release it from the connector and the hook
.
64
Hardware Maintenance Manual