•
"2010 LCD bezel assembly" on page 88
•
"2020 LCD hinge cap" on page 89
•
"2030 LCD panel" on page 90
•
"2040 Hinge kit" on page 91
Removal steps of the wireless LAN antenna kit and LCD rear cover assembly
Step
Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (2)
Cable routing:
When you install the antenna kit, route the cables as shown in the following illustration.
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
94
Hardware Maintenance Manual
1
1
Color
Black
Torque
0.181 Nm
(1.85 kgf-cm)