Error Messages; Beep Symptoms - Lenovo ThinkPad S540 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad S540:
Table of Contents

Advertisement

Table 2. Numeric error codes (continued)
Symptom or error
2111
Read error on HDD1 (Mini SATA)
2200
Machine Type and Serial Number are invalid.
2201
Machine UUID is invalid

Error messages

Table 3. Error messages
Symptom or error
Fan error.
Thermal sensing error.
This system does not support batteries that are not
genuine Lenovo-made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries.
Attention: Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.

Beep symptoms

Table 4. Beep symptoms
Symptom or error
Four cycles of four short beeps
One short beep, pause, three short beeps, pause, three
more short beeps, pause, and one short beep
Three short beeps, pause, one short beep, pause, one
more short beep, pause, and three short beeps
Five short beeps
One long and two short beeps
Five short beeps, pause, five short beeps, and pause
FRU or action, in sequence
1. Reseat the Mini SATA device.
2. Replace the mini SATA device.
3. Replace the system board.
Replace the system board.
Replace the system board.
FRU or action, in sequence
1. Replace the fan.
2. Apply thermal grease.
3. Replace the system board.
Replace the system board.
Replace the battery.
FRU or action, in sequence
Replace the system board.
1. Replace the memory module.
2. Replace the system board.
Remove the device from ExpressCard slot.
Replace the system board.
Replace the system board.
Replace the system board.
Chapter 4
.
Related service information
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents