1030 Battery Pack - Lenovo ThinkPad S540 Hardware Maintenance Manual

Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when
you replace the base cover. For the labels that are not shipped with the new base cover, peel them off from
the old base cover, and adhere them to the new one.
The following illustration shows the location of each label.
9
If the Windows Certificate of Authentication (COA) label
old part with the label attached to the customer, or provide a letter to the customer stating what the label
was originally on the computer and what the part number, serial number, and product key were on the label.
When you replace the base cover, apply the serial number label
The following labels need to be peeled off from the old base cover, and then adhere to the new base cover.
1
System label
4
Asset tag
5
Indonesia rating label
6
Indonesia postel label

1030 Battery pack

For access, remove this FRU:
• "1020 Base cover" on page 60
Important notices for replacing a battery pack
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
62
Hardware Maintenance Manual
1 2 3
8 7 6 5
3 is attached to a part that is replaced, return the
2 .
7
Israel homologation label
8
Malaysia SIRIM label
9
Hard disk drive warranty label
4