Table of Contents
Advertisement
5.
OPERATION
Refer to the item " 4. CONNECTION", connect each component correctly.
Turn on the power source of the connected equipment and the camera.
Point the lens at the object, adjust the lens iris, focus, etc..
Refer to the item "5.1 White Balance", to do the adjustment.
5. 1
For the white balance adjustment of this unit, AWB (Automatic White Balance) and MANU (Manual white balance)
adjustments are provided. To select the desired mode, refer to the items "7.2 (3) WHT BAL (White balance)" and "7.
Outline
Adjust white balance by displaying the white
object inside the area set by AWB menu and
Note
When the shutter mode is E.TRG, AWB is not
available.
AWB (Automatic white balance)
Perform the C.TEMP (color temperature conversion) setting, if necessary.
(Refer to the item "7.2 (3) WHT BAL (White balance)".)
3200K : Appropriate for indoor shooting.
5600K : Appropriate for outdoor shooting.
Result displayed
Automatic white balance adjustment finished correctly.
Automatic white balance adjustment cannot be performed because the video level is too low.
Set the video level propely.
Automatic white balance adjustment cannot be performed because the video level is too high.
HIGH
Set the video level propely.
Automatic white balance adjustment cannot be performed because the color temperature is
too low.
If the C.TEMP is set to 5600K, set to 3200K.
If the message appears with the C.TEMP set to 3200K, change the illumination or use a color
temperature conversion filter.
Automatic white balance adjustment cannot be performed because the color temperature is
C. TEMP HIGH
too high.
If the C.TEMP is set to 3200K, set to 5600K.
If the message appears with the C.TEMP set to 5600K, change the illumination or use the
color temperature conversion filter.
Automatic white balance adjustment cannot be performed because the shutter speed mode
is E.TRG mode.
Automatic white balance adjustment cannot be performed for other reasons. Such as no
white area is included in an object, etc.
MANU
Adjust the white balance manually using the WHT
BAL menu while shooting the white object.
Adjustment is performed by confirming with a
monitor etc.
Meaning
9
Advertisement
Table of Contents
