(1. 1) Changing The Setting In; (1. 2) Changing The Setting In; (1. 3) Changing The Setting In; (1. 3. 1) Changing The Setting In - Toshiba IK-TF5P2 Instruction Manual

( 1.3. 2) Changing the setting in 1P SR mode
SHUTTER
MODE
E.TRG
TRG.P
EXP.
OUT.P
(a) Changing the polarity of the input trigger pulse setting
Move the "
Select either ,
(b) Changing 1P SR exposure time setting
Move the "
(c) Changing the partial scanning/binning setting
Move the "
Move "
* The preset value of partical scanning/binning is not displayed, when OUT.P is OFF.
E.TRG
1P SR
16ms
OFF
17