Synchro. Scan Operation; 1 ) Setting By 1H; 2 ) Setting By The Frame - Toshiba IK-TF5P2 Instruction Manual

7. 3

Synchro. Scan Operation

The shutter speed can be set by the horizontal scanning period (1H) or by the number of frames.
( 1 ) Setting by 1H
1H/525H ~ 524H/525H stands for the setting by the 1H and the shutter speed can be set by the 1H (31.8 μs).
When operating Partial Scanning or binning, the number's listed below can be used for setting.
Partial scanning/binning OFF
Partial scanning 93fps, E.93fps
Partial scanning 121fps, E.121fps
Partial scanning 126fps, E.126fps
Partial scanning 174fps, E.174fps
Partial scanning 199fps, E.199fps
Partial scanning 250fps, E.250fps
binning
( 2 ) Setting by the frame
2FRM to 512FRM stand for the setting (long period exposure) by the frame.
The video signal stored during the frame period set is output as 1 frame video image at a frame interval specified.
(Internal VD)
RGB data
(video interval image)
FVAL
LVAL,
DAVL
26
1H/525H ~ 524H/525H
1H/340H ~ 339H/340H
1H/260H ~ 259H/260H
1H/250H ~ 249H/250H
1H/181H ~ 180H/181H
1H/158H ~ 157H/158H
1H/126H ~ 125H/126H
1H/263H ~ 262H/263H
n
(4FRM setting)
n+1