Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor Password & User Password Setting; Save And Exit Setup - CHAINTECH 7VJS User Manual

Figure 3-9 Frequency/Voltage Control
CPU Clock
It is recommended to keep the default setting for stable system operation.
Overclocking:
This motherboard is designed to support overclocking. However, please
make sure your components are able to tolerate such abnormal setting,
while doing overclocking. Any attempt to operate beyond product
specifications is not recommended. We do not guarantee the damages or
risks caused by inadequate operation or beyond product specifications.
DIMM Voltage Regulator
This feature allows the system memory to run at Power ON of Voltage.
AGP Voltage Regulator
This feature allows the AGP bus to working of Voltage.
CHIPSET Voltage Regulator
This feature allows the CHIPSET to working of Voltage.
CPU Voltage Regulator
This feature allows the CPU to working of Voltage.
WARNING
Overclocking
This motherboard is designed to support overclocking.
However, please make sure your components are able to
tolerate such abnormal setting, while doing overclocking.
Any attempt to operate beyond product specifications is not
recommended. We do not guarantee the damages or risks
caused by inadequate operation or beyond product
specifications.

3-9 Load Fail-Safe Defaults

Load Fail-Safe Defaults loads the default BIOS values directly from the CMOS
Setup Utility menu (Figure3-1). If the stored record created by the setup program
becomes corrupted and therefore unusable, these defaults will be loaded automatically
when you turn on the computer.
Chapter 3 Chapter 3

3-10 Load Optimized Defaults

Setup Utility menu (Figure3-1). If the stored record created by the setup program
becomes corrupted and therefore unusable, these defaults will be loaded automatically
when you turn on the computer.
3-11 Set Supervisor Password & User Password Setting
located under the Security Option function in BIOS Features Setup Menu (Figure 3-1).
When the Security Option function is set to Setup, a password is required to enter
BIOS and change BIOS settings.
System, a password is required to enter both BIOS and the computer's operating
system (for example Windows 98) found on the boot drive.
BIOS (Figure 3-1). The main purpose of separating user and supervisor is to allow
only the supervisor to have control over the settings in BIOS. The user, on the other
hand, is only allowed to access the computer's operating system and change the user
password in BIOS.

3-12 Save and Exit Setup

entered in the setup utilities will be recorded in the CMOS memory of the BIOS chip.

3-13 Exit Without Saving

Setup program without recording any new values or changing old ones.
31 32
Load Optimized Defaults loads the default system values directly from the CMOS
There are four different variables that control password settings. The first two are
When the Security Option function is set to
The third and fourth variables are user password and supervisor password selected in
Note: that when there is no supervisor password set, the user password controls
access to all BIOS settings.
If you select this and type [Y] (for Yes) followed by the [Enter] key, the values
Selecting this option and pressing Y followed by the [Enter] key lets you exit the