Connecting A Serial Controller To The Tp-578H Via Rs-232; Connecting A Balanced/Unbalanced Stereo Audio Device; Figure 4: Balanced Stereo Audio Connection; Figure 5: Unbalanced Stereo Audio Output Connection - Kramer TP-578H User Manual

4. Connect the Audio Out S/PDIF digital, RCA audio connector on the
TP-578H to the audio acceptor, (for example, an audio amplifier with
speakers).
5. Connect the power adapter to the TP-578H and to the mains electricity (not
shown in
5.1 Connecting a Serial Controller to the TP-578H via
RS-232
To connect a serial controller to the TP-578H:

From the RS-232 9-pin D-sub serial port on the serial controller connect:



5.2 Connecting a Balanced/Unbalanced Stereo Audio
Device
Figure 4
audio device to the Audio Out 5-way terminal block.
Figure 4: Balanced Stereo Audio
Connection
TP-578H - Connecting the TP-578H
Figure 3).
Pin 5 to the GND pin on the TP-578H RS-232 terminal block
Pin 3 to the RX pin on the TP-578H RS-232 terminal block
Pin 2 to the TX pin on the TP-578H RS-232 terminal block
and Figure 5 illustrate how to connect a balanced and unbalanced stereo
Figure 5: Unbalanced Stereo Audio
Output Connection
9