Bunn ITCB-DV Technical Training Manual page 4

BUNN ITCB (Infusion Series® Tea and Coffee Brewer)
BUNN innovation makes it possible to brew iced tea, hot tea and hot or iced coffee from one model, the ITCB. Fea-
turing BrewWISE with pre-infusion and pulse brew technology, the Infusion Tea and Coffee Brewer gives the opera-
®
tor complete control over the brewing process.
Recently, BUNN has modified the ITCB to accommodate high volume brewing. The ITCB-DV HV was designed to
achieve a larger brew volume than the ITCB-DV. In addition to the high volume brewing system, components and
features were affected during the transformation.
First, we will take a look at the key features of an ITCB-DV. Most of the features can be found on all ITCB models
and others will be specific to that machine.
Key Features
Model: ITCB-DV & ITCB-DV with Flip Tray
Note: Features listed below with an asterisk* only apply the ITCB-DV model. The remaining features relate to all
ITCB models.
• *Models available with integrated flip tray that converts to three positions: thermal carafe, airpot and tea dispenser.
• Large tank provides back-to-back brewing capacity and allows 3 or 5 gallon (11.4 to 18.9 litres) tea batches.
• Dual voltage adaptable. Can operate at 120V/15 amp or 208-240V/20 amp.
• Programmable batch switches allow full and half batches of iced tea.
• Brews into all BUNN iced tea dispensers (except T DS-5),1.9 to 3.8 litre airpots, thermal carafes and can
accommodate BUNN ThermoFresh® Servers.
• BrewWISE® intelligence with pre-infusion and pulse brew for maximum flavor extraction. Digital temperature
control and cold brew lockout.
• Easy Pulse interface allows automatic programming of pulse routine.
• Energy-saver mode reduces tank temperature during idle periods.
• Display advertising messages and machine status.
• Brew counter keeps track of how many batches brewed.
• Most models include graphic overlays for customizing user interface.
• English and Spanish alphanumeric display.
Plumbing: 20-90 psi (138-621 kPa). Model supplied with a 1⁄4" male flare fitting.
*Requires minimum 1GPM water flow.
Dimensions (Tall): 34.37" H
(87.3cm H x 29.3cm W x 60.4cm D)
*Dimensions (Short): 31.12" H x 11.53" W x 23.78" D
(79.1cm H x 29.3m W x 60.4cm D)
4
ITCB-DV HV Training
x 11.53" W x 23.78" D