Parts Name Of Remote Controller - Toshiba RAV-SM562MUT-E Owner's Manual

PARTS NAME OF REMOTE CONTROLLER

Display section
In the display example, all indicators are displayed for the expla-
nation.
In reality only, the selected contents are indicated.
• When turning on the leak breaker at the first time, [SET DATA]
flashes on the display part of the remote controller. While this
display is flashing, the model is being automatically confirmed.
Accordingly, wait for a while after [SET DATA] display has
disappeared, and then use the remote controller.
2
1
3
4
5
6
14
1
SET DATA display
Displayed during setup of the timer.
2
Operation mode select display
The selected operation mode is displayed.
3
CHECK display
Displayed while the protective device works
or a trouble occurs.
4
Timer time display
Time of the timer is displayed.
(When a trouble occurs, the check code is
displayed.)
5
Timer SETIN setup display
When pushing the Timer SETIN button, the
display of the timer is selected in order of
→
[OFF]
→ [ON] → No display.
6
Filter display
If "FILTER " is displayed, clean the air
filter.
7
TEST run display
Displayed during a test run.
7 8
SET DATA SETTING TEST
H
[OFF] repeat OFF timer
FILTER
RESET TEST
CODE No.
UNIT No.
R.C. No.
8
Flap position display
Displays flap position.
9
SWING display
Displayed during up/down movement of the flap.
10
Set up temperature display
The selected set up temp. is displayed.
11
Remote controller sensor display
Displayed while the sensor of the remote
controller is used.
12
PRE-HEAT display
This indication is displayed, the indoor fan
stops.
13
No function display
Displayed if there is no function even if the
button is pushed.
14
Air volume select display
The selected air volume mode is displayed.
(AUTO)
(HIGH)
(MED.)
(LOW)
4
CODE No.
SET DATA SETTING TEST
UNIT No.
R.C. No.
H
TEMP.
ON / OFF
TIMER SET FAN MODE
TIME SWING/FIX VENT
SET CL UNIT
9
10
11
12
13
Display
section
Operation
section